|
|
Structure of apartment building – selected elements
Kanichová, Barbora ; Švaříčková, Ivana (referee) ; Perla, Jan (advisor)
The aim of the bachelor thesis is selected construction elements of low-rise apartment building. Reinforced concrete slab of the upper floor is solved in this thesis. The requirement to limit the propagation of impact noise from the staircase to the building and thermal bridge interruption was taken into account in the design of the construction. The deformation of the ceiling structure was verified regarding the integrity of the deposited infill structures. RFEM 5.18 software is used to solve internal forces. All the calculation are performer according to ČSN EN 1992-1-1 and ČSN 73 1201.
|
|
|
Detached family house with design studio
Dufek, Tomáš ; Žižka, Lukáš (referee) ; Vajkay, František (advisor)
The project addresses the new family house with design studio. It also dealt a double garage and parking for design studio. The building is designed in steep terrain. The building is designed Porotherm (masonry+ insulation system, ceilings). Roofing, flat roof construction. Thermal transmittance conform to the recommended values according to.
|
|
|
Detached House
Michna, Martin ; Smolík, Jindřich (referee) ; Winklerová, Jitka (advisor)
This elaborated is on the theme of "Family House." They work out of the A, B, C, D.1.1 and D.1.3 and Annex no. 6 to Decree no. 499/2006 Coll., On Construction Documentation, as amended by Decree no. 62/2013 Coll. Family house is designed for 4-5 members. Building Plot is located in Uničov and a number 2126/59. It is a two-storey building with a partial basement. In the eastern part a garage, without a basement. The roof of the garage serves as a balcony. It is accessible from one of the rooms on the second floor. The building is covered with a wooden truss. This creates a pitched roof with a covering of corrugated iron. On the south side terrace is partly covered by a small roof hanging on steel rods. In 1PP is lightweight gym, bathroom, food store, inventory, laundry room and utility room where the boiler is located. V 1 NP is a study, kitchen with pantry, dining room and living room and wc. 2 NP serves as the resting part. There is a bathroom, bedroom, closet and three children's rooms. Perimeter, internal bearing and inner walls are made of Porotherm. Only the basement is part of shuttering. Ceiling construction is Miako and beams Pot.
|
|
|
Family house
Leupold, Karel ; Manová, Ludmila (referee) ; Maceková, Věra (advisor)
Bachelor´s thesis solve design of the Family house in city Telč. It is a two-storey house with a partial basement, the roof is pitched with a slope of 35°. The house is designed of brick POROTHERM. The building is set on a land slightly sloping. The object is designed by valid standard.
|
|
|
Load bearing RC structure of the multiple dwelling
Janisch, Filip ; Perla, Jan (referee) ; Šimůnek, Petr (advisor)
The project deals with the lower part of the construction of a residential building. The parking spaces are situated in three underground floors. The five floors occur in the over-ground part of the building. The building is based on the secant walls of Milan around the perimeter. Internal walls and columns are supported with micropiles. In this project are designed base plate, external walls and stairs. Static system and the calculation of the internal forces was carried out in Scia Engineer 2012 Student version.
|
|
|
Static solution of the ceiling structure of apartment building
Habanec, Kamil ; Nečas, Radim (referee) ; Zich, Miloš (advisor)
The Bachelor thesis deals with the static solution of the ceiling construction of an integrated apartment building. The aim is to design, or change the sizes of the projected structures in the submitted project, to ensure the interruption of thermal bridges and protection against foot noise. Subsequently, their static solution, dimensioning and assessment to marginal states. The elements intended for the solution are ceiling structures above the second upper floor, beams, a connecting staircase and a column. The calculation of internal forces was performed in the student version of SCIA Engineer 20.0 with a comparison of values on an independent simplified model. The work also includes drawing documentation for the aforementioned elements. The calculation was carried out according to the applicable standards and principles.
|
|
|
Reinforced concrete structure of a administrative building
Januš, Ondřej ; Švaříčková, Ivana (referee) ; Šulák, Pavel (advisor)
The main subject of this bachelor thesis is focused on the design of reinforced concrete locally supported slab of a multifunction building. Internal forces are calculated by a computer software SCIA Engineer and its resultes are compered with simplifield method. Another part includes the design of a reinforced concrete stairway and a column situated in the center of the disposition. The calculation method is based on ČSN EN 1992-1-1.
|
|
|
Structure - space - city Urban block complation
Burešová, Karolína ; Kurtis, Gabriel (referee) ; Palaščák, Michal (advisor)
Based on a regulatory plan, I chose a plot of the city corner for my diploma thesis, which is an introduction to Francouzská Street. At present, this plot is used only as a parking lot, but it is located in an interesting busy place in the mouth of the five roads. Based on the new regulatory plan, the plot is located on the dominant site of the city piazzetta with a function full of people and commercial partners. My goal is to create a significant city corner, which will be a local dominant of the nearby area. The filling of the house is commercial, administrative, and residential. The proposal will allow fluctuations in the ratio between these functions due to the variability of market demand. With the statue of a staircase, I want to create a communication space for the residents of the house, where PROMENADE will be created and at the same time will serve as an interesting backdrop for the parterre.
|
|
|
Family house
Pánek, Martin ; Klimeš,, Vladimír (referee) ; Klimešová, Jarmila (advisor)
The main concern of this thesis is to design three storey family house. The house is divided into the main living area to the garage and basement areas and a part of an establishment. There is 2 floors in the house and there is partially a basement. The house has a flat roof.
|
|
|
Model of the block house in Revit
Richterová, Zuzana ; Volařík, Tomáš (referee) ; Berková, Alena (advisor)
The aim of the bachelor thesis was to create a model of the ground floor in the software called Revit and explain the method of work in the program. This model is based on the real construction of a slab block which is located at Herčíkova 2, Brno. The created model was created on the provided documents from the 2018 course called Complex project and from the preserved original design documentation from 1969. The whole bachelor thesis is divided into chapters, which are named according to the individual modeled elements. Especially for the chapters Floor, Staircase, Railings, Doors, Windows, Annotations and Linking of projects, there is a more detailed description, analysis of problems, demonstrations, working with different types of families, inserting coordinate system and comparing reality and model in the project. Furthermore, in the bachelor's thesis there is a chapter Tips, which is used to simplify work in software Revit.
|
guest ::
